OMD-12
General Details
Besides the Oil/Solids/Turbidity Monitor, Type: OMD-7, DECKMA HAMBURG GmbH has expanded the scope of supply with the OMD-12 Series, especially developed for applications in clean water or with a low content of solids in the water. This Series is especially for the quick, continuous control of Oil-in-Water in many different applications.
OMD-12 specification
- Range: 0 – 30 ppm (trend indication to 50 ppm)
- Accuracy: better than +/- 2 ppm insoluble Oil (with special calibration)
- Degree of Protection: IP 65
- Size OMD-12: 175 x 190 x 220 mm (W x H x D)
- Size OMD-12 A: 210 x 330 x 220 mm (W x H x D)
- Sample Temperature: +1°C to +70° C
- Alarm Contact Rating: potential-free 1 pole change-over contacts, 3 A / 24 V
- Alarm Operating Points: 15 ppm (Factory Set) adjustable from 1 – 30 ppm
- Alarm 1 & 2 Operating Delay: 2 – 30 sec. adjustable
- Power Supply: 24 Volt AC/DC, other voltages on request
- Output Signal: 0 – 20 mA or 4 – 20 mA, reversible Ri < 500 Ω
Technical Details
- Range: 0 – 30 ppm (trend indication to 50 ppm)
- Accuracy: better than +/- 2 ppm insoluble Oil (with special calibration)
- Degree of Protection: IP 65
- Size OMD-12: 175 x 190 x 220 mm (W x H x D)
- Size OMD-12 A: 210 x 330 x 220 mm (W x H x D)
- Sample Temperature: +1°C to +70° C
- Alarm Contact Rating: potential-free 1 pole change-over contacts, 3 A / 24 V
- Alarm Operating Points: 15 ppm (Factory Set) adjustable from 1 – 30 ppm
- Alarm 1 & 2 Operating Delay: 2 – 30 sec. adjustable
- Power Supply: 24 Volt AC/DC, other voltages on request
- Output Signal: 0 – 20 mA or 4 – 20 mA, reversible Ri < 500 Ω
Ask about this product
Contact form